Originally posted by outkast:
ALSO!can you have the headlight knob to match the heat
control knobs.That would be sweet 
Right now, its a big enough task to get the two diffrent knobs to work out with the molds that will also work on the controls. I have two prototypes done.. in grey plastic (they are just "prototypes" to see if the mold is correct and are fully functionable and durable enough.) The two types that he made did not pass. The molds were not accurate and the back end of the knobs did not match up correct. Ofcourse this would all be very much expected in the stages of creating a new product form scratch. He is going to remake the mold on Monday, and give em another shot. If the mold wroks, its off to durability. TO make sure these knobs are of equal or greater quality than the OEM. Example, although they may look the same, I don't want someone to put the knob on, turn the fan on, and crack the fitting on the knob because the diffrent plastics required to make these clear colored opaque knobs is diffrent than the resin plastic used for the OEM. I'll find out how this plastic works on Tuesday or Thursday at the latest. The knobs are being made (or we'll be attempted to be made form) an acrylic resin. Similar to normal resin, but can be worthlessly cheap and undurable if not molded corectly Once all that is worked out, he can pump out hundreds of these little jewels extremly quickly and precisely. I would hate to make these, ship em out, and find out they are junk because they are cracking. Before anyone gets their hands on these, I wanna make sure that thjey are 100-110% more durable than our current ones on all of are cars. The 4 standard colors are still a go.
I'll fill you guys in on MOnday how everything went. Later
Oh, and yes, I will also ship to Canada, same price for you guys. I will not discrimnate to my Norhtern friends.
Chad
2006 Pontiac G6 3900SFI GTP Coupe
CAI, Stainless Cat Back, Vector Tune, Strut Brace, Eibach Pro Kit, Custom Made Projector Headlights, 4300K, 20% Tint
Former Owner- 2000 "Stryped" CSVT
CEG Dragon Run- Oct 13-15
| 
