Originally posted by TMoose02:
Also the engine fan is running constantly. The water temp came into the normal range but I still have no heat.
The fan running constantly would suggest the engine is hot. A hot engine, along with no heat would suggest a possible water pump problem. IIRC, there is one sensor that controls the fan, and another sensor that sends a signal to the gauge. If the sensor to the gauge indicates you are okay, but the other sensor indicates you are hot, you may not have enough coolant. I don't know, I'm just thinking out loud here. I would start by checking the coolant level, just to make sure. Check the temperature of the radiator hoses and see if they are hot. If not, the water pump may not be pumping, or you may not have enough coolant to pump. Just some ideas to think about.
95 Contour Zetec, ATX (wrecked, sitting in the barn)
95 Mystique Zetec, MTX
2000 Taurus SEL 3.0L Duratec
1994 Crown Victoria LX 4.6 V8
1993 Chevy Silverado 4.3 V6
| 
