Pulled Two Contour Motors from the Top It's not that hard. The motor and transmission comes Out as One. I pulled it from the top since I have no lift. I brought an engine Hoist for $240 with free shipping I think it's well worth it then renting one you can take your time with It. I think the hardest Part Is pulling the axles out of the transmission. You can do the flywheel And Clutch yourself The Syncros and Quaife "recommended" you can go to any tranny shop to do that work. Any questions just PM me I can guide you a little. You are also going to need a Fuel line disconnecting tool and a clutch align tool that's the only special tools you need.If you are going to upgrade the Shifting tower let me know I have a brand new one
