Power to the coil is provided by Fuse F4 (20A) in the BJB.

Check that one.

Make sure that you are checking for voltage on the DC connections with the ignition set to RUN, not on the outputs for the plug wires. The plug wire terminals will not have any DC voltage on them at any time.

Steve

98 Contour SE Sport 2.5 Duratec ATX The wifey's car 89 Taurus SHO - 246K miles 94 SHO ATX - 190K 1997 F-150 5.4L ATX - The Workhorse 150K. ANY THREAD WITH "OMG" or "WTF" ETC IN THE TITLE WILL BE IGNORED!