Originally posted by Seawulf:
30lbs 
With 30lb/hr injectors you'll need to run 80psi fuel pressure and hit 85% duty cycle in order to get .60 specific fuel consumption. If you run them 100% you only have to run 60 psi. Go for the 42s, or at least 36s.
Click on the link I posted, that will tell you what you need.
Seawulf I know the numbers sound crazy but those are estimates your using, one of those estimates is drastically different on a V6 versus other cars, it has to be because otherwise Jason would have blown his from being to lean because the estimates say he would have ran out of fuel completely and he didn't he still had enough for a 12.5:1 AF. Same with mine I had 42's and it was way overkill, when we ran the 303 FWHP we were running so pig rich to prevent detonation and it still pinged slightly, hence we backed it down to 278 FWHP and had to cut a TON of fuel in order to make right. I don't know what it is but these car DO NOT follow the normal estimates. 30's will be fine for Po-Jay.
I offer PnP Heads for all durtec's details at PnPheads.com or jesse@pnpheads.com for details.
| 
