Register Log In

Contour Enthusiasts Group Archives Forums General Troubleshooting CEL P1120, P1121

Print Thread

Re: CEL P1120, P1121 #801087 11/20/03 06:47 PM
Joined: Nov 2002 Posts: 851 B brianl703 Veteran CEG\'er
brianl703 Veteran CEG\'er B Joined: Nov 2002 Posts: 851	Sometimes the TPS screws are on really tight so you may want to use a 1/4" socket, a ratchet, and a phillips bit to get it off.

Entire Thread
Subject	Posted By	Posted
CEL P1120, P1121	Champagne96GL	11/20/03 07:14 AM
Re: CEL P1120, P1121	brianl703	11/20/03 01:22 PM
Re: CEL P1120, P1121	fdunford	11/20/03 01:29 PM
Re: CEL P1120, P1121	jmatzick_dup1	11/20/03 02:25 PM
Re: CEL P1120, P1121	Champagne96GL	11/20/03 04:55 PM
Re: CEL P1120, P1121	fdunford	11/20/03 05:14 PM
Re: CEL P1120, P1121	Champagne96GL	11/20/03 05:24 PM
Re: CEL P1120, P1121	brianl703	11/20/03 06:47 PM
Re: CEL P1120, P1121	Champagne96GL	11/20/03 07:42 PM
Re: CEL P1120, P1121	brianl703	11/20/03 08:34 PM
Re: CEL P1120, P1121	Champagne96GL	11/20/03 09:58 PM
Re: CEL P1120, P1121	Champagne96GL	11/21/03 03:00 PM
Re: CEL P1120, P1121	Rogerm60	11/22/03 12:28 AM
Re: CEL P1120, P1121	Champagne96GL	11/22/03 12:31 AM
Re: CEL P1120, P1121	Rogerm60	11/22/03 12:36 AM
Re: CEL P1120, P1121	Champagne96GL	11/23/03 07:15 PM

Moderated by horseydug_dup1, Ray_dup1

Link Copied to Clipboard

Powered by UBB.threads™ PHP Forum Software 7.7.5