Originally posted by SVTJOE1:
Hey Guys.. Has anyone ever heard of Orion Cobalt subs? I can get them brand new from Orion for about $19 for the 10"s and abuot $23 for the 12"s
I work for an Orion dealer. I just checked and I cant get people these deals.. I was checking today and I guess its only an employee thing. I was thinking of getting the Cobalts or mabey going to the HCCA's by orion. I can get the 10" HCCA for about 76 bucks....I really want something thats clear and hits quick..But I also want something to draw some attention when needed
..You guys ever hear of these subs?
Thanks,
Joe
Originally posted by SVTJOE1:
Ok guys. I have a system ready to go in my SVT. I have. Boston Rally Components (5 1/4) for front. I have Boston rear 5x7s. I have a sony Mobile ES AMP (XM1004GX...I think ). I also have two Jbl 10's (temproray till my Orions show up) I have a JBL 4 channel amp that is going to run these two subs. I have an alpine CDM7854 deck... I have a monster 4 gauge kit and a distribution block and everything else... But NOW the hunt is one fo a "amp jumper"? I need to bypass the factory amp. I have gon to Best buys. Curcit Citys and some other shops and ther there like " I dont have it" Where do I get this thing? What is it called exactly... Everyone says that my factory speakers will sound really bad if its not bypassed. My friend and I installed my deck and bought a premium harness for behind the deck...Did that disable it??
Thanks guys....Car audio is not my thing.
Joe
I'm not tryin to flame you here, but you said you worked at a car audio shop? All you need is a Ford Premiun Sound harness from Metra. If you are running new speaker wires to every speaker then you actually wont need it since you have amplifiers for every channel and RCA outputs on the radio (your radio wont be wired to any speakers through the factory harness this way.)
Now if you are going to use the factory speaker wire and amplify the speakers with the sony, buy the Premium sound Eliminator, grab the double ended harness out of the bag and cut the wires in the middle (make one harness now two peices). You only need one half (forget which, think the female end) Connect the speaker wires from the sony to the right harness end (check F/R L/R to make sure you wire that correct) and plug it back into the the factory amp's output harness that you just unplugged from the factory amp
If Best Buy or CC or the shop you work at doesnt have this harness somethings very wrong. I would not buy it at CC or Best Buy though, most likely $30 :rolleyes:
