I dont have the wiring diagram in front of me, but basically you'll need to confirm that your getting a pulse on 3 of the wires that go into the coil pack. When you say you have power on the coil pack, I assume you've measured one or more of the input wires. The next question is weather you get a voltage change on any of the wires when the car is cranked. It's these pulses which are greatly 'stepped up' by the coil pack creating the high voltage to fire the plugs. No input pulses, no output. Hope this helps, I'll dig out my manual when I get home to see if I can provide some measurement points and expected measurements...
