Oops. I havent been paying attention.
Originally posted by dion:
Those would be the ones that Jon and I used, as well as Swazo and Milan. You just have to come up with a mounting solution.
Yep, those are my lamps. Two highbeams and four of the H9 lows. IIRC, they can also get the H7 (euro) and the H8 (fog) pieces. Anyway, I will deal with them again, they are quite helpful and I am thinking of swapping out to the H7 unit when I go to D2S.
Originally posted by ButtonPuncher:
You could also pick and choose your preffered lamp style. Xenon, H7 halogen, or H9 halogen.
The H7 (bulb) is easier to get, but is rated at a lower output then the H9. I can also tell that you havent priced the xenon units. It would be more like thinking, pre-98 SVT body kit or the two xenon modules. 
However, if you head over to faq.auto.light.tripod.com you can find info about modifying the backplate of a halogen unit to take a D2S. 
Originally posted by Cris'pus:
Did this darken the lens during the day? AKA like Nightshades?
It darkened it like three coats of flat black paint. The light only came out of the opening. It was also LEDs so it stayed quite focused.
Here is something else that should get you guys thinking...
They fit quite easily. If you do it spend $15 extra and buy some of the 3M protectant that Xpel sells. If you dont you will be buying new lamps in six months. 
These lamps also did gain the correct plugs later. It would have been pointless to be testing wire length with the socket in place. The black plastic cover still fit also.
