I have a 95 Contour 2.5L. If you need to get the wire harness recall/replacmeent performed...do this now....
These codes could quite easily be caused by the defective wire harness. I had similar problems...when I purchased my car for a bargain...had engine problems. I removed the upper and lower intakes, fuel injectors, etc. and cleaned all. When the intakes were removed the harness to the fuel injectors and had no insulation, they were completly bare! Also I noticed that as I worked on the engine and wires that I touched the insulation would flake off.
Again, I would have your car towed, etc. to the dealer to have this work done and then see what codes are evident...I believe this will save you a great deal of hair pulling!
