Originally posted by scooby757:
You sure about that math APT CSVT?
By your example, this "360watt" amp should be just fine with a 10 or 15 amp fuse on the power cable.
I'm sure. According to my HP calculator, there are 4 of Ohm's laws.
V=IR
P=VI
P=(I^2)R
P=(V^2)/R
360w into 4ohms was an example. However, if this amp is capable of 1500w, probably bridged mono into 2ohms, then 27A max. But if Marshal is going to hook up 2x400w into 2 ohms, then 20A will be peak current draw.
