Originally posted by skeeters_20:
And where does your wiring go after it goes into the back of the seat?
Well, as you can see the speaker wires and the RCA cables arent hidden yet. But the rest of the wiring runs behind the fabric down to the bottom of the seat, and then under the carpet up to the front dash, where it is connected to the Head unit. Made it look extremely clean. Now I have to run the RCA under there to. Just havent made it a point to actuall doing it yet. I'm a slacker. 
I have a MTX Thunder 421D Mounted in the same location. However, I did go a step further and removed the entire back seat and I removed the fabric and I drilled holes in alignment with the connects on the amplifier and I ran the cables under the metal back plate of the seat and the only thing you see is the amp, and about 2 inches of the wire coming from beneath the seat in a nice little "L" shape into the amp. Looks so very nice and I have absolutely no worries about the wires touching or looking messy. The speaker wire comes out at the very bottom and secretly connects to my speaker box in the trunk. Looks very simple and clean. Just thought I'd share my setup with you. It is not too hard to do.
**By the way, having the amp there serves some good purpose. When you have the seat down to let the bass through, if you let down your windows, or at least the back window, that amp gets all the cooling it will need. I noticed that my amp ran very efficient and cool. Plus it looks nice going down the road.
-Bishop
*Invisible Hero*
1999 SVT Contour/Amazon Green
Keep It Real.
Beware the fury of the silent man.
| 
