Contour Enthusiasts Group Archives Forums General Troubleshooting 1/3,000ths of an inch enough warping to...

Print Thread

Re: 1/3,000ths of an inch enough warping to... #756790 09/26/03 11:52 AM
Joined: Mar 2002 Posts: 2,319 Pickering, Ontario, Canada H horseydug_dup1 Hard-core CEG'er
horseydug_dup1 Hard-core CEG'er H Joined: Mar 2002 Posts: 2,319 Pickering, Ontario, Canada	Head gasket surface flatness spec from '97 service manual states the following for both block and head: .025/25 x 25.050/150 x 150 Perhaps another member can translate. 98 Mystique LS v6 atx 163,000km 97 Contour LX v6 atx 163,000km

Entire Thread
Subject	Posted By	Posted
1/3,000ths of an inch enough warping to...	Mystang	09/26/03 11:15 AM
Re: 1/3,000ths of an inch enough warping to...	horseydug_dup1	09/26/03 11:52 AM
Re: 1/3,000ths of an inch enough warping to...	procyon_dup1	09/26/03 04:49 PM
Re: 1/3,000ths of an inch enough warping to...	BStoneMega	09/26/03 05:49 PM
Re: 1/3,000ths of an inch enough warping to...	Mystang	09/26/03 07:05 PM
Re: 1/3,000ths of an inch enough warping to...	Stevedrivr	09/26/03 10:53 PM
Re: 1/3,000ths of an inch enough warping to...	luvinmycontour	09/26/03 10:57 PM
Re: 1/3,000ths of an inch enough warping to...	mrspindlelegs	09/26/03 01:54 PM
Re: 1/3,000ths of an inch enough warping to...	Nate'sTour	09/26/03 03:07 PM
Re: 1/3,000ths of an inch enough warping to...	BStoneMega	09/26/03 04:22 PM

Link Copied to Clipboard