Ok, so I've got 2 amps, a 2 channel jensen 150x2 and 4 ohms with the pass through option. I've also got a rockford fostgate 4 channel amp with the two rca inputs of course. So i figure i'll just run my infinity 5x7's off of 2 channels and run the DVC 12 sub off the other two channels and i'll daisy chaing the jensen and the fostgate. Oh and the fostage doesn't have a fuse on it but the jensen does. I ended up running 4ga into a fused distro block (30 amps each) which splits into 2 8ga's. Those powered the amps. Also ran two 8ga into a distro block which goes into 1 4 which is the ground. well When i hooked everything up, including remote turn ons, not everything worked peachy. The jensen was not turning on but the RF amp was. The remote turn on's are coming from a 7band EQ up front so this leads me to believe that the set of RCA's going straight to the fostgate turned the amp on. I did not however get sound when i wired up the subs to the side of the amp. I'm quite confused and this garbled write up probably doesn't help but if you weed through it, please give me a heads up...I've check all voltages and everything checks.


96 Contour LX ATX Clarion DB625MP 2 "5x7" infinity kappa's in front 2 stockers in back 1 JBL GT 1200D 12' 1 jensen xa2150 pushing the sub *upgrades comin soon