Originally posted by bamf2go:
I already have two passive crossovers, crossover point is 2500hz. It says their is selectable attenuation for the tweeter level, but I don't know how to do it...
Do you know if the crossover was designed for a 6 ohm tweeter?
If not your crossover frequency may not be 2500 Hz at all.
It's possible to look at the value of the components on the crossover to know crossover type and resulting crossover point with a 6 ohm tweeter. You would need to look up a network table for the crossover type and you will know your crossover point.
If the crossover was designed for 6 ohm tweeter well you have 2500 Hz, which may be too low, but you should be able to match your tweeter to your midbass in terms of volume.
Anthony B. Davis
2Deep2 Silver SVT
2002 IASCA SQ Ult Ama 601+ World Champion runner up
2002 SLAP dBQ Champion 
2000 USAC SQ World Champion
2002 USACi SQ World Champion
| 
