Originally posted by racerx:
DO NOT USE ANYTHING EXCEPT MDF FOR AN ENCLOSURE. MDF is the best thing to make a box out of. 3/4 in. thick. Calculater the volume inside the enclosure and take into consideration the aorspace you LOOSE when you add the sub into the box. If you are only looking for a good bang but not rattling the fasteners out of the trunk, buy one 12"sub and match the impedence rating to a smaller amp. Believe me, ask anyone who has heard my car (cardoctor) it bangs. I have a JL audio 12-WO4 sub. its a 12" W0 series 4ohm woofer. It was mated to an MTX 275X amp. I took the MTX out and I am in the process of replacing it. Feel free to e-mail me any questions you might have, I will help as much as possible.
karter93@hotmail.com
I think you need to structure your posts a little better. There is some useful information is all that bias. I do not claim to know it all nor have I done it all when I offer my advice. In fact, quite the opposite.
There are a lot of products that are good and there are a lot that are not so good, or at least not worth the asking price (like our factory replacement seakers at $3.25).
