Get a wire coat hanger.
Cut off two 6 inch long pieces.
Bend the pieces in the shape of a U.
Locate the holes at the corners of the head unit.
Insert one 'tool'about 1/2 inch into the upper and lower left side holes, the other in the upper and lower right side holes.
While pulling outward (toward the doors) on the 'tools' to release the latches, work the head unit out of the dash.
It fits snugly so it make take some convincing, but it will come out without damaging the dash or the head unit.
AL
Red '98 SVT E0 3098/6535
KKM, Elizabethan EGR Plate, TH fix
OMP front brace
Hightower rear brace
DMD
B&M with reverse lockout disabled and centering spring removed
Mobil 1 oil and trans fluid
A6 Side Markers, Optima orange, Horn recontent
Painted Sail Panels
VooDoo Knob and pedals, RogerR deadpedal
Blau Houston & CD changer
Cup holders that work
Donnelly mirror
BAT Sill Plates
and a Bullitt fuel door
| 
