Thanks John. I like the grip of the T1S tires.
UPDATE: My wheels are here and are going to be installed tomorrow morning.
I haven't received my hub rings yet, but that's a minor inconvenience. I'll put them on once I get them.
I also took the time to test fit the REV wheels. I still have to use the wheel spacers on the front, but in doing so I insure that there is enough clearance with the outboard side of the Wilwood calipers. Actually, with the curve of the spokes, the issue is with the cast area around the pistons, closer to the center of the wheel, as compared to the Centerlines and the Konigs where it was the cast area at the outside rotor edge. I'll take some pics tomorrow, once the wheels are installed.
