My driver window won't go up! I have electric windows and when you press the switch to go up nothing happens and you can hear a clicking sound coming from the relay in the door. I can reach the cable that runs up and down the guide and the tension on it never changes too. All of my documentation says that to get to everything you must first raise the window. If you put your hands in the door and try to manually lift the window it won't budge. It will till slightly from one side to the other wihich would tell me that the window isn't jammed. Could the window mount be jammed on the guide of the regulator? I also noticed the the top cable of the regulator is seperated where it goes into the motor housing but the spring and inner cable seem to still be connected. Any suggestions? Thanks!
