Contour Enthusiasts Group Archives Forums General Troubleshooting Camshaft Position Sensor P0340

You did all this right?

Installation

1.Make sure camshaft position mounting sensor surface is clean and that camshaft position sensor O-ring is in proper location on camshaft position sensor.

2.CAUTION: Do not overtighten camshaft position sensor retaining bolt or damage to camshaft position sensor or engine mounting surface may occur.

Position camshaft position sensor onto engine and install retaining bolt. On 2.5L engine equipped vehicles, tighten retaining bolt to 8-12 N-m (71-106 lb-in). On 2.0L engine equipped vehicles, tighten retaining bolt to 18-23 N-m (13-17 lb-ft).

3.Connect fuel charging wiring to camshaft position sensor.