I just got your payment for 100 330 ohm resistors, i order them also
the stock bulbs come right out and you put the new ones in, very quick and easy installation. You will have to run a power wire to non stock resistors, along with the 330 ohm resistors. and yes ground too. As for hooking it up in a row, all I know is you have to have different powers for each one cause they get dimmer and dimmer with each LED. but yes, a distribution block should help.
And for the door handle stuff, pre98 models have them there, just add a LED, and resistor and remove the old bulb. as for the outside you will need to drill holes and all and make sure they fit the bulbs, glue them in, and run wires from your switch lights in the doors. it will be hard with the window, a lot of wire, and a real pain in the ass. But it will be very nice. I am thinking about that now too.
