Well, as time has passed so have some mysteries!
As I last mentioned, I was to replace the wires and plugs with MOTORCRAFT parts. I opened up the IMRC box. It looked good so I closed it up again. I then shot some throttle body cleaner into the engine while running and tried to get the secondaries to open at the same time as I was spraying. Much better! While I was at it I changed the freakin camshaft position sensor as the CEL kept returning. 1 day after the new part was installed it threw the same old code again!
The engine now pulls real strong, no missing even with the AC on! So much better! But it still throws the P0340 Camshaft position sensor circuit failure CEL. It must be the wire harness? Can I direct-wire the sensor to the ECU to bypass the open circuit. If so how....need help here!
regards,
John
Last edited by jcmac; 08/20/03 03:06 AM.
