The indiglo gauge overlays for the Contours are notorious for binding up, especially around the tach area. The only way to secure the faces is by using an adhesive. Most of the import overlays I have seen use stock screw locations around the needles, etc. to hold the faces down, but our Contours do not have such mounting locations. When I installed mine, I used a spray headliner adhesive on the back of the overlays, making sure to mask the holes on the opposite side so that the adhesive would get around the holes, but not make it to the front face. I then applied the overlays and let them sit. Superglue worked for awhile but the heat just got to it. One more piece of personal advice... peel off the old faces... I know people say not to, but if you are going to glue the faces down with any kind of glue worth it's salt, you won't have those stock faces intact if the overlays should need removed, so just peel them off and give yourself some more space. The headliner adhesive was still holding up when I traded the car in last week (that would make the indiglos about a year old). HTH.
