Originally posted by Huibrex:
Ok everyone point and laugh at the retarded one!!! - :-0 I just thought that I would blow the stock amps by puting in a higher powered deck. That the extra juice would fry the amps thus, problem. I thought I would have to run the speakers right from the deck no stock wiring hence larger pain in the ass than I was looking for. Thanks for giving me a flashlight now if I could just figure out how to turn it on. LOL
Also, you should not have to cut any factory wires! They have install kits that allow you to plug directly into the factory radio connectors. Of course you would have to run new power, ground and speaker wires to an external amp though! Crutchfield makes all the harness adapters you will need! You can get most of them at Best Buy, Circuit City, etc..., but Crutchfield was the only place I was able to find the harness adapter to plug my amp(in the trunk) to the factory speaker wire harness connected at the factory amp location(behind glovebox). This harness was long enough to reach all the way with room to spare! I believe it was under $15 for it!
[This message has been edited by FraleyWP (edited December 09, 2000).]
