Originally posted by Rambytes:
What do you mean by "the tiny sensor wires within the sample tube"?
If I open where the filter and the sensor are, I see like "2 electrod"...
Do you mean that, or you mean where the big plug is connected in the little black box, where "Air Flow" are indicated?
This would be below the black box where "Air Flow" is indicated. If you open the air filter box and look into the top half where the air intake hoses are attached, you'll see that there is a 3" diameter aluminum cylinder with a vertical post in the middle of it. At the top of the post is a small tube with a 1 CM opening. Deep inside that tube are 2 tiny wires that can get dirty. These can be gently cleaned with an electronic spray cleaner.
Looking into the MAF:
The post is in the middle with the sampling tube toward the top.
| 
