I have to give credit where credit is due...
Jon (Exdelayed) and Daymon (Swazo) have been walking me through this step by step. I actually started to go towards the way Jon has his lights mounted, but I wanted to look that Daymon and Milan have gone, so I had to combine both approaches. It seems to be okay so far. I have the lenses mounted, but only screwed down in two places, until I can seal the backside. If the housing gets dust or wet inside, I can easily remove the front lens to clean it up.
Once I get the rear of the housing sealed, then I'll seal up the front.
As for selling those...Milan does....
dion
98 SVT, 200 whp/190 lb. ft tq (tuned by ADC), 3.0, P&P heads w/2.5L valves, optimized TB, MSDS, SCA 2.5" catback, SHOshop UIM/LIM, underdrive pulley set, TD's, Koni/H&R, BAER/TCE, Progress, CF1 products
| 
