WHAT THE [censored]!!!! I just spent another two hours today trying to get that dang thing out. I took the bike to work today, and on my way back I got a flat tire. I had to walk in 90+ degree weather for about 5 miles with a bike with a busted rear tire that makes a lot of noise. Talk about embarrasing fun! I am having the worst week of the summer. Does anybody have any other ideas on how I can get this sensor out? Ive tried everything short of taking it to the mechanic. I would take it to the mechanic and let them play with it, but I have no money for that. Ive tried wd-40, gear lubricant (80w90 oil), pliers, hammers (prying side), drilling in screws (heads broke off on all but the steel screws, and those end up breaking the plastic around it to free itself). ANY IDEAS? I remember back in 5th grade when I played the trumpet, the mouth piece wasnt supposed to be pulled out, but twisted. One time I pulled at it and it got really jammed. My teacher had to use a special tool to twist it out. Now, is there some way i can get a way to twist this sensor out? The tip of it broke, so I basically have a little plastic nob with screws sticking out of it.
If you have any ideas, even if they seem stupid, post it. Dont let this thread sink with no answers!
