Originally posted by 1998contourV6:
OK, I removed the lamps and the reflector and set them on the ground. I put two more light coats on and not much better. I need to know if i can let it completely dry and possibly wet-sand it it smooth out the bumps it has. I looks ok it just has bumps all over, mostly on bottom where it ran.
Can i wetsand it and then put one more coat on???
Please Help, Thanx alot!!!



This stuff is NOT ment to be sanded at all.

It sounds like what you have done so far is screwed.

So just start over. Wipe it all clean with laquer thiner.

Then take some 1000 grit sand paper and lightly sand the surface.

The first 4-5 coats will look like @ss.. Just make sure to put them on REALLY light, almost misting.

For the stuff to look good, you need a good 10 light coats.

Its really thin, and runs really easy, as you found out.

Dont worry about the light and dark area's.. After the 6th coat it should start to even out a bit.


1998 SVT (Black) 1995 TSi AWD Targa Top (Sold) 1996 CBR 900RR