Originally posted by LoCoZ2.0:
Just clean and paint....sanding can be a PITA!!! 
And you wonder why it chips. 
on the "rubbery cheap plastic" handles in the cougar, if you sand well with 200 and then again with 400 and wipe clean with a wet towel, and then dry it, give it about 3 coats of duplicolor filler primer, sanding with 1000 between each coat and cleaning, then use about 4 or 5 thin layers of duplicolor paint (again, sanding in between each and cleaning up the dust), and then about 4 coats of clear (don't have to sand the clear if you did a good enough job earlier one)..
I have the handles completely black and we haven't had a problem yet.
2000 Dark Tourmaline Green Cougar - V6/MTX
SVT UIM/LIM, SVT TB, 80MM Filter, Custom Burned MAF, 19lb Injectors, MSDS Headers & YPipe, YoDude DynoMax Exhaust, B&M Shifter, Enkei RS5 18x7.5, Roush Springs, Z3 fenders, custom interior, lots more
| 
