Just curious where most people temp gauge sits... mine seems LOW (98 2.5)

it works, it goes up if i sit for a long time, but

i drive 30 minute home everynight @ about 75 mph (125 kph) stop start etc etc... and I sit between the low and the N in normal

I used to run hotter, but a company I deal with at work sells oil addatives, so I been using a bottle have gave me you add a 35mm film case full every oil change, he says you can drive around with no oil (pffffft!) but it brought me down from between the O and R to below the N

supposidly the stuff doesnt use teflon either which fouls sensors... 20 bucks Canadian for like 20 oil changes.. cheap.. seems to work :p

To be installed:
-New BAT H20 Metal pump (got it)
-Bosch Platinum plugs (got them)
-9mm fordracing wires (on order)
-rear bushings clunk clunk arg!
-Intake when $$ is available

Installed:
-17" BSA Rims and Kumho 712's
-Pioneer Deck and 5x7's
-Side markers, ding strips gone

My ride 98 2.5 ATX : http://members.rogers.com/putz1979/contour/tournoding2.jpg

computer for sale (1800/512meg/60gig.gf3) http://members.rogers.com/putz1979/computer.htm