Could'nt find a resitstor in the spot you said.The only thing we even came close to thinking might be it is at the pass side at top of fan shroud there is a plug in the line.the wires' runnning to the resistor and gr/w and gr/bl well we found these wires followed them and they run to this plug in the line which the same wires are on the other side of the plug in its like they just plug into themselves.I would descirbe it as a splice in the line but only the same wires run in as comming out.my dad checked it and the voltage that ran into the plub came out on the other side.IF we unplug it the high speed fan will not run either.Could this be the resistor.
