Quote:

What about the large hole at the rear of the door? I've ripped out the foam, and am planning on spaning it with some thin pieces of 2" mild steel, then deadening over top of those so its fairly rigid.




Thats a cool idea. I used a piece of 1/8" plastic to cover the hole, then put damping sheets over it. For the bottom hole (map pocket), I put the sheets on the inside of the plastic door panel, so when I put the door panel back on, it sealed up against the metal part of the door. It seems to work pretty good so far. HTH.

-Ken V. 1998.5 SE Praire Tan Zetec ATX psycho_bass@hotmail.com Roush springs Roush rear sway bar BAT struts 17" Millie Miglia HT3 and a ton of subtle asthetic mods