drop the rear part of the front subframe....
it EASILY adds 2" to get to thoses bolts... that 2" diff is huge when you only start with about 1/2". at CougarFest 2K2 we did a front sway bar bushing swap in the parking lot in less than 1/2 hour using this method
You only need remove 2 bolts to lower the subframe, however i do recommend putting a jack under the rear roll resistor so that you don't put too much tension on the rest of the subframe.
2000 Cougar V6 MTX
2001 3.0L Swap w/ PnP Heads - It ran, it boomed, it RUNS AGAIN
Nearly all suspension mods
Big ass stereo
...and more...
See Her Here
