Like I said in that topic. Some modification will need to be done at the upper mount that sits on top of the strut tower is slightly larger than the original. So at the very least you would need to enlarge the whole in the brace plate a little to accomodate the larger mount.
PS I installed a set on my buddies SVT which we had istalled GC's and koni's o with a 2.5" drop and we corrected the camber from -3° to -0.8° on each side, so these things work VERY well.
Last edited by Stazi the Aussie; 04/30/03 07:03 PM.
