Contour Enthusiasts Group Archives Forums General Troubleshooting Wheels grinding

Well I replaced the bearings and the drivers side hub. I had spun the bearing because the drivers side bearing siezed up and the hub was spinning on it. Well even after I replaced it all and got it all back together, the noise is still there. I'm pissed!!! I've seen some other threads on the rear wheel bearing going bad as well but I'm almost positive that the noise is coming from the front drivers side. I'm starting to think that it might be the tires that are bad. I recently had an alignment done with a tire rotation. That's when I noticed the problem. When I disassembled the steering knuckle, I could see rust all over the drivers side bearing so it was indeed shot. One would think that's the cause of my vibration. The tires only have 10k miles on them. I'm wondering if Sears might warranty tires since they are going bad so quickly. Of course, if that's the case. I'm gonna try and see what they say..