Which door (front or back)?

If I remember correctly, that part (on the front door) should be fastened with a screw. There should be a small cover (about 3/8" in diameter) covering the screw that can be popped off with a small screwdriver.

If I'm not wrong, the back doors should be the same!?!


1996 Contour SE Sedan 4D (Royal Blue)
Duratec V6 2.5L 24-valve DOHC
Automatic
75,000 miles
No Mods (unless you call the DMD a mod)
Replaced EGR valve (gunked up), EVR (EGR VR), PCV valve, and evaporative emissions hose (cracked).