|
|
Joined: May 2000
Posts: 2,039
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: May 2000
Posts: 2,039 |
Originally posted by CzechChamp: Say why don't we just speak Czech?!
Naaa, English is better and easier. 
Quote:
Na kolik si myslis ze by me takove upravy vysly?
H&Rs ~ $200 Koni struts ~ $550 or ST200 struts ~ $200 KKM ~ $100 Heat shiled ~ $65 or make your own Superchip ~$200 Wheels ~ $how much can you afford? You can get a set of 17" wheels and tires for under $1000. It goes up from there.
Installation varies, but all of those you can do yourself if you're mechanically inclined.
Expect to pay about $150-250 to get the struts/springs installed. All the rest you can DEFINITELY do yourself.
Quote:
Nekteri si stezuji, ze ten chip nefunguje tak jak ma.... 
That's right. IF it's callibrated for a stock SVT, and you add a y-pipe, catback, MAF, TB, the chip will prolly need recalibration.
Quote:
Narust na vykonu by mohl byt tak cca 15koni a 25Nm tocaku, to by bohate stacilo....Co myslis?!
Nope, no way. You'll be lucky to see 5-6hp. Personally, I wouldn't bother with the chip, unless you can go on a dyno and see what you make pre-chip and after-chip. FYI, check out the FAQs and How-Tos on the main page. Well worth the time it takes to read them all.
Now go get that SVT.
-J
'98 4Runner
|
|
|
|
|
|