Originally posted by StolonTour#05:
Also, just to pass along, the stock resistors in the door switches are 1/4watt - 390ohm resistors.




they are 1/4 watt, and 12 ohms with tolerance of 5% if i am correct well, the top resistor in the drivers door switch is, now for the others the switches are 39 ohm with tolerance of 5% now, i dont know about the bottom resistor in the drivers door switch. I also believe that the resistors in the unluck buttons are the same. Now as for the sun/moon roof switch, pin 4 and 5 are missing on pre98's i dont know about post98. But if you want to hook a LED to the switch you will need a switch from a donar car, and you will need the wiring harness, connecting the power from the sunroof. Becareful how you connect it though the current coming on those hot wires will be different. They should be 12v lines. But may have more or less current then you need. If you bought LEDs from me the LEDs are all 4.5v leds.

BTW here are the pics from my install.






thats not nice they made it so you couldn't see pictures just uploaded. well, i got past it, i just freshly uploaded them. see you can't even view this picture unless you do it the secret way, hehe

95 SES Sold 99 SE Sport Sold 99 SVT T-Red Tan Interior. K&N, Magnecors, 19' Theorys, And some audio stuff.