Contour Enthusiasts Group Archives Forums General Group Buy KVR BRAKES GROUP BUY ****Including Pricing****

Packages will include 4 KVR cross drilled or slotted rotors (stock diameter), with front and rear KVR carbon metallic pads for Contours,SVT Contours, and Mystiques with factory disc brakes. Front and rear combos are applicable but will not be discounted as much as a full four rotor/pad package. Cadmium plating and combination drilled/slotted rotors may be optioned but will not be discounted as we do not receive a discount on these options. Shipping charges will be in accordance to your location, so your address information and phone number must be submitted. There are no discounts on pads only orders but will be for rotors only orders. Email me for pricing.

Start Date: ASAP
Estimated End Date: February 27, 2003 (can be changed if necessary)

KVR's Retail Prices (rotors and pads)
4 wheel disc (SVT) $619USD ($823.73CDN)
4 wheel disc (non SVT) $545.00USD ($731.81CDN)
Front rotors and pads (SVT) $348.00USD ($454.81CDN)
Front rotors and pads (non SVT) $274.00USD ($364.81CDN)
Rear rotors and pads (all models) $271.00USD ($367.00CDN)

Our Regular Retail Price (rotors and pads)
4 wheel disc (SVT) $439.00USD ($639.00CDN)
4 wheel disc (non SVT) $389.00USD ($579.00CDN)
Front rotors and pads (SVT) $242.00USD ($347.00CDN)
Front rotors and pads (non SVT) $192.00USD ($287.00CDN)
Rear rotors and pads (all models) $197.00USD ($292.00CDN)

Discount Levels
5 to 10 purchasers (rotors and pads)
4 wheel disc SVT $395.00USD ($580.00CDN)
4 wheel disc (non SVT) $355.00USD ($520.00CDN)
Front rotors and pads (SVT) $242.00USD ($330.00CDN)
Front rotors and pads (non SVT) $189.00USD ($275.00CDN)
Rear rotors and pads (all models) $190.00USD ($277.00CDN)

11 or more purchasers (rotors and pads)
4 wheel disc (SVT) $365.00USD ($530.00CDN)
4 wheel disc (non SVT) $325.00USD ($475.00CDN)
Front rotors and pads (SVT) $242.00USD ($310.00CDN)
Front rotors and pads (non SVT) $179.00USD ($260.00CDN)
Rear rotors and pads (all models) $180.00USD ($265.00CDN)


Options
Cadmium plating $48.00USD ($72.00CDN) for all four rotors. Plating comes in silver, gold or black.
Combination drilled/slotted rotors $35.00USD ($50.00CDN) per rotor.

If you are going to participate, please post here and also send me an email chris@ctamotorsports.com and state KVR Contour Brakes Group Buy in the subject line. Please include in the body of the text, your vehicle information (i.e. equipped with 4 wheel disc), and most importantly your full name, mailing address and a telephone number. Orders will not be shipped without a phone number.

We will run this group buy for about 2 to 3 weeks, and can extend the time frame for those whom need a little more time. Please post your comments in this thread as I will check regularly. As time progresses, a finish date will be established and noted here.

Thanks for you time.

Since I can't edit my first post, I wanted to note one slight error under the following section for Front SVT rotors/pads under the 11 or more discount level.

11 or more purchasers (rotors and pads)
4 wheel disc (SVT) $365.00USD ($530.00CDN)
4 wheel disc (non SVT) $325.00USD ($475.00CDN)
Front rotors and pads (SVT) $213.00USD ($310.00CDN)
Front rotors and pads (non SVT) $179.00USD ($260.00CDN)
Rear rotors and pads (all models) $180.00USD ($265.00CDN)

BUMP

The initial post seems to be getting more attention.

ill be in on this let me know when a payment is due

I'm in. I need to do something to my csvt since I missed out on the CFH GB. I want all four svt rotors and pads w/ silver cadmium plated rotors. (all four) What has been peoples initial opinions on the kvr pads & rotors? What is the difference between cross drilled and slotted?

Please email me if you are participating in this group buy.
chris@ctamotorsports.com

Thanks.

This is a good group buy everyone. I can personally vouch for Chris as a seller and KVR as a product.

I love my new brakes. Lot less brake dust on the rims.

Chris is a great guy who will MAKE SURE you get taken care of. Anyone who wants a good set of brakes for the money - jump in on this. I also had my brakes plated in Silver and it was welth worth the extra few $$$.

the way chris has explained the difference between cross drilled and slotted is the way i understand it...as i stated on the other post i bought my front brake set (in black cadmium coat ) last yr during his group buy....i have no problems with them...low dusting, no cracking and he's a great guy to deal with...as i remember everyone was extremely happy with the service and turn around time on the orders....i know my order took ~3 weeks...one week for him to recieve my m.o. from soCal to canada, a week to process my order and a week of shipping the parts back to me

i haven't done business (yet) with any of the other companies we use on the site but i can vouch for chris being top notch and very helpful

jump in on this guys...i dont think u'll be disappointed

IM in if we can get the 11 people.How much would S/H be?What good does the plating do?ANy negative effects of it?