Originally posted by RTStabler51:
yes, readings from the HEAD, which get plenty of oil. Originally posted by wavrdr:
On a side note, I'm running an electric gauge tapped to the driver's side head....perfect fit, and readings in the 40-50 psi at WOT.
[Mechanical Engineer]
Yes the heads do get plenty of oil, but the simple fact that there is a restrictor in the oil feed from the block TO the head, which through simple fluid dynamics, tells you the pressure is lower on the head side of the orifice.
[/Mechanical Engineer]  
2000 SVT Turbo 295hp/269ftlb@12psi
#1 for Bendix Brakes Kits!
Knuckles rebuilt w/new bearings $55
AUSSIE ENDLINKS $70
Gutted pre-cats $80/set
A lack of planning on your part does not constitute an emergency on mine!
| 
