I got mine also on Friday and installed it Sat. I spent quite a bit of time trying to adjust it to where the tips do not rub against the inside of the valance cutouts on both side. It seems the y section in the rear is not wide enough. Also, the passanger tip is too short, it bearly clears the valance. I will spend some more time with it today and will probably have to take it to a muffler shop to be adjusted with a torch.
I have to say that I am dissapointed with the fit of this Brullen system after having waited so long for them to work the bugs out of the design. Also, for a do-it-yourself bolt-on system, I found their instructions and installation suggestions for adjusting the fit of the system a bit lacking.
