Originally posted by Viss1:
Hey, dumb question - do our cars use the universal connector that the tool comes with?
Yes, all OBD-II vehicles (all 1996+ and some pre-1996) have a standardized (universal) 16-pin connector. On our cars, the port is under the driver-side kick panel near the driver's door. You have to look under the panel to find it. Other vehicles hide it in different areas.
96 Contour SE
Duratec V6 24-valve 2.5L ATX
108,000 mi.
Replaced: crankshaft w/ DMD, EGR valve (clogged), EVR, DPFE, PCV valve, evap emissions hose & tube (cracked), window regulator (broken), LH & RH PCV tubes, UIM gasket (leak), ignition coil
| 
