Hi. I have a 95 Mercury Mystique GS that I recently replaced the front brake pads on. I finished replacing the brake pads on the front (disk pads). The right side of the brakes work fine, on the left the caliper seems to be grinding the rotor. I had both rotors resurfaced (turned), and I cannot seem to find the problem of why the left brakes are grinding. Everything was put in correctly, etc. I took them to an AutoZone to get them resurfaced, so I assumed that they had enough depth on the rotor. Before I had replaced the brake pads, the front-left rotor was "skipping" when I started to brake, I assumed it was warped. I don't know if I need to replace the rotor, perhaps tighten the guide bolts in the back of the caliper... or what to do. I've asked around, and a few people assume that the rotor is too warped, while others swear that couldn't be the problem. I seem to have enough depth on the rotor. I can post pictures if anyone is interested. This is my first post, so thanks a lot for the responses.
