Contour Enthusiasts Group Archives Forums General Troubleshooting Sho Shop strut brace

Installed a sho shop front brace and noticed there isn't much clearance. I found that I have to push it back so it rests on some hoses right next to the fire wall. It has shown some scuffs where it must be rubbing on the hood. Also, the little ring thing that sits over the struts where you attach it, has a good few cm gap. It has been like that ever since I had the bat euro package installed. I'm sure if it was flush with the strut tower the brace might have a little more room. Does anyone with this brace have any words of wisdom on how to fit it or better yet some pics of one installed. Thanks in advance.