I'm only doing a "how to", I don't plan on making any money off of CEG'ers.
To do my low beam projector's I used the got following stuff:
(2)- Hella 90mm H9 Projector Low beams
(2)- H9 connectors
(1)- Craftsman Sanding drum bit kit
(1)- Dupli-color Self-Etching Primer
(1)- Dupli-color Primer Sealer
(1)- Plasti-kote "Body Shop Paint" (lol) Dark Grey Metallic
(1)- Plasti-kote Truck & SUV Clear coat
(1)- Permatex 5 Min. Epoxy
(2)- Permatex black and clear silicone
.....and used the following stuff I already had:
(1)- 1/2" Makita Drill
(1)- Bench Grinder (Real handy for the bulk of the grinding)
(1)- 3M 1000 Grit Wet/Dry Sandpaper
T15 and phillip drivers
Basic hand tools
All said and done $150
It isn't as hard as I made it seem in my last couple of posts. I'm currently working on a fairly easy "How To" that will show what I've been yacking about lately.
All of my friends have
REALLY liked them a lot! Their jaws drop and they usually have a few swear words rolling out for their first words!
I'm almost amazed on how much better they look! On a scale of 1-10, I think it's a 9. It would've been a 10 if I knew then, what I know now.
