with the brake fluid full have someone pump the clutch dont open the bleeder until you tell them 2 hold the clutch pedal 2 the floor with the pedal 2 the floor open the bleeder wait 4 air or bubbles 2 escape close the bleeder then have them pump agian repeat these steps it may take awhile because by leaving the bleeder open while pumping you where introducing air into the system keep an eye on the fluid level while bleeding or your put more air into the system again if your brake pedal is low because im sure they are being that they probably share the same resivour repeat the same steps 4 the brakes as with the clutch
