Going in the morning to get my precats put on.... hopefully this will be the last of it for a while.... i've done a lot so far... my CEL has went off and been that way for 100+ miles now.... As soon as i find a site with the best priced baffled oil pan i'm ordering one, same with the DMD...


Originally posted by unisys12:
Originally posted by ContourSE:
i did'nt gut my precats In fact i'm scared to mod my tour until i get the basics done... did the waterpump...



You are going in the right direction. Have the thing stable before moving on to greener pastures! Your problem is with your precats themselves, not that they have been gutted.
When the dealer puts them on you will be very happy.

Originally posted by ContourSE:
need a baffled oil pan and accusump, DMD.... you know



Actually all you should need is the baffled oil pan. I would not think you would need the sump also. The new baffled pan holds the oil in place better and eliminates the need to have the sump. To be honest, I have made some pretty hairy right hand turns without either and have had no problems. Just remember to keep the oil level good, but don't go crazy with it like hitting a clover leaf at 90 miles an hour thinking that it will be ok!

And before anyone goes beating up on me about what I said about the turns without either the pan or sump... That was all before I started coming here and I don't do it now. I am not taking any chances and I don't suggest anyone else do the same. I am getting the pan soon and will change it when I swap tranny's.


#3162 of 6535 98 SVT Silver frost Viper Responder 791 w/ 2way remote start Let the modding begin!