Originally posted by shoB4svt:
When my fan only worked on 'high', it turned out to be the connector under the glovebox. Seems it was corroded and not making elctrical connection. I pulled it apart, cleaned the connectors on both male and female, and re-plugged it, and voila, it works fine.
my connector was a little more than corroded. note that this happened AFTER it had been worked on for the recall. so i had to pay for the new resistor and harness and do fords recall work for them.
the 3.0L
oval port 3.0L '98 midnight blue se
| 
