Originally posted by SILVER SVT:
i had to take alot of fluid out of the resivor. to be able to let pressure off to push the pistions back in.
after doing all this the fluid was still at max and had done ever thing right brake peddal was still soft so i bled the brakes. it helped a little but it still takes one pump before they get hard any ideas there is no air in the lines i have bled them twice now any thing is helpful now thanks
DON'T EVER reverse flow the ABS Unit or Master Cylinder! You run the high risk of damaging both components. Always loosen the bleeder screws when pushing the caliper back in.
I hope you didn't contaminate the ABS Unit or blow any seals on it or the Master Cylinder.
Also there is a specific pattern (LF-RR-RF-LR) you must bleed the brakes in. You can't just bleed the fronts.
