two "really flat" flat head screw drivers. I recommend small ones
PATIENCE
JB Weld, Silicon Glue, any really strong ADHESIVE
STEPS:
Using one screw driver pry AROUND the Ford emblem on the chrome strip, with the other pry OUT the emblem. Do this with great PATIENCE, average time is 10-15 mins to get it off without scratching up your chrome strip.
Clean up the remaining adhesive from the recessed area for a smooth surface
Apply the adhesive to the BACK of the emblem or in the chrom strip. For best results use a CLEAR drying adhesive
The emblem are a very tight fit but there is less that 1/16" play top and bottom. If you're picky like me center it and leave the trunk OPEN for atleast an hour for it to cure
Let it fully cure over night...normally about 12-24 hours.
Please don't remove your emblem yet since I won't be shipping anything out till Feb when I actually start making them. If I do get orders up to 15 starting of January, I'll go ahead and ship end of January before school starts.
